Consumer Product Safety Commission recalls

The magnetic beads violate the requirements of the mandatory federal magnet regulation because they contain one or more magnets that fit within CPSC's small parts cylinder, and the magnets are stronger than permitted. When high-powered magnets are swallowed, the ingested magnets can attract to each other or to another metal object and become lodged in the digestive system. This can result in perforations, twisting and/or blockage of the intestines, infection, blood poisoning and death.

The recalled fog liquid can expire sooner than the expiration date listed on the product. This can pose a risk of respiratory or other infections in individuals with compromised immune systems, damaged lungs or an allergy to mold.

The tiki torch top can break open and/or fall off while lit, posing a burn hazard.

The fuel line between the fuel rails can leak, posing a fire hazard.

The recalled mattress violates multiple provisions of the Safety Standard for Crib Mattresses, including the thickness test, and is missing the required warnings and labels. The product poses a suffocation hazard to infants.

The candy's rolling ball can dislodge from the product into a child's mouth, posing a choking hazard and risk of death.

The sneaker display's magnets can forcefully attract, break, splinter and emit sparks, posing a laceration hazard. In addition, when two or more high-powered magnets are swallowed, either accidentally or intentionally, the ingested magnets can attract each other and become lodged in the digestive system. This can lead to perforations, twisting and/or blockage of the intestines that can lead to infection and death.

The heads of the Donald Duck and Daisy Duck figures can detach, posing a choking hazard to young children.

The blocked vent switch (BVS) can fail to shut down the burners if the boilers are installed at altitudes above 2,000 feet and the vent system becomes blocked. In such an event, the boiler can emit excessive amounts of carbon monoxide into the building, posing a carbon monoxide (CO) poisoning hazard to consumers.

If microwaved or filled with extremely hot liquid, the mugs can overheat or break, posing burn and laceration hazards.

The portable fuel containers violate the child-resistant requirements for closures under the Children's Gasoline Burn Prevention Act (CGBPA). The closure for the products is not child resistant, posing a risk of burns and poisoning to children.

If nearly but not fully cocked, the crossbow can discharge unexpectedly while consumers cock or uncock the crossbow, posing an injury hazard.

The sounders and strobes can malfunction and cause the fire alarm system to fail to alert consumers of a fire.

The air fryers can overheat, causing the handles to melt or break, posing fire and burn hazards. Additionally, the air fryer ovens can overheat and the glass on the door can shatter, posing fire, burn and laceration hazards.

The blocked vent switch (BVS) can fail to shut down the burners if the boilers are installed at altitudes above 5,400 feet and the vent system becomes blocked. In such an event, the boiler can emit excessive amounts of carbon monoxide into the home, posing a carbon monoxide (CO) poisoning hazard to consumers.

The clasp on the braided black bracelet sold as part of the gift set contains high levels of lead and cadmium. Lead and cadmium are toxic and can cause adverse health effects in children.

The recalled crib mattresses violate the federal safety regulation for mattresses by failing to meet the flammability and labeling requirements, posing a fire hazard to children.

The brake line can come in contact with the brake disc, which can cause damage to the brake line and result in brake loss, posing an injury hazard.

The recalled high chair which converts into a booster seat violates the safety regulations for both high chairs and booster seats. Multiple failures were identified including, but not limited to, insufficient restraint system, stability, static load, latching and locking mechanisms, leg openings, warnings, labels, and literature. The product can tip over or collapse and present a fall hazard to children.

The plastic pieces on the end of the pants' faux drawstrings can come loose and fall off, posing a choking hazard.

The mattresses violate the smoldering ignition requirements of the federal mattress flammability regulation, posing a fire hazard.

A crack can occur between the PA-10B AC Power Adapter's upper and lower cases.  The upper and lower cases can separate completely and expose electrical wiring, posing electrical shock and electrocution hazards to consumers.

The bicycle headtube/downtube weld can become damaged and separate from the bicycle frame, posing fall and injury hazards.

The recalled 5mm magnetic ball sets violate the mandatory federal toy magnet regulation because they contain one or more magnets that fit within CPSC's small parts cylinder and the magnets are stronger than permitted. When high-powered magnets are swallowed, the ingested magnets can attract each other, or another metal object, and become lodged in the digestive system. This can result in perforations, twisting and/or blockage of the intestines, infection, blood poisoning and death.

The swings pose a suffocation risk because they were marketed, intended, or designed for infant sleep, and they have an incline angle greater than 10 degrees in violation of the CPSC's Infant Sleep Products Regulation and the Safe Sleep for Babies Act. In addition, the swing fails to meet mandatory warning requirements regarding sleep under the swing standard.

CPSC testing determined the magnetic ball sets do not comply with the requirements of the mandatory federal toy regulation because they contain one or more magnets that fit within CPSC's small parts cylinder and the magnets are stronger than permitted. When high-powered magnets are swallowed, the ingested magnets can attract each other, or another metal object, and become lodged in the digestive system. This can result in perforations, twisting and/or blockage of the intestines, infection, blood poisoning and death.

The lithium-ion batteries in the Anker EverFrost Coolers can overheat, posing a fire hazard.

The paint or surface coating on the red mallet, blue mallet, red hoop, and winning post contain levels of lead that exceed the federal lead paint ban, posing a lead poisoning hazard. In addition, the coating on the red and blue mallets contains levels of regulated phthalates that exceed the prohibition of specific phthalates. Lead and phthalates are toxic if ingested by young children and can cause adverse health issues.

The recalled charge station can overheat, posing a burn hazard to consumers.

The recalled children's pajamas fail to meet the federal flammability regulations for children's sleepwear, posing a risk of burn injuries to children. 

 

The wheelbase welds on the stands can bend or break while the stand is being moved, causing the stands to fall over, posing tip-over and entrapment hazards.

The recalled children's pajama sets violate the flammability regulations for children's sleepwear, posing a risk of burn injuries to children. 

The recalled mouthwash contains ethanol in a concentration which must be in child-resistant packaging, as required by the Poison Prevention Packaging Act (PPPA). The packaging of the products is not child-resistant, posing a risk of poisoning if the contents are swallowed by young children.

The bicycle headtube/downtube weld can become damaged, and separate from the bicycle frame, posing fall and injury hazards. 

The snowmobile's left ski can break, posing a risk of serious injury and crash hazard. 

The recalled children's pajamas fail to meet the flammability standards for children's sleepwear, posing a risk of burn injuries to children.

The portable water heaters can leak gas from the gas regulator connection, posing a fire hazard.

The primary (drive) clutch can fail causing the clutch or its components to separate from the vehicle, posing an injury hazard. 

The rugs violate the federal flammability regulations for carpets and rugs, posing a fire hazard.


© 2024 Hart Area Fire Department